Showing all 21 results
-
K5-PRO 20g (2×10g twist up tubes) + K4-PRO 7g applicator – thermal putty & paste set
SET OF PRODUCTS & THERMAL PASTES & THERMAL PUTTY19,99 €K5-PRO 20g (2×10g twist up tubes) + K4-PRO 7g applicator – thermal putty & paste set
Complete thermal service in one set: K5-PRO putty (>5.3 W/m·K*) for pad replacement and gap filling up to ~3 mm, plus K4-PRO silicone paste (>4.6 W/m·K*) for CPU/GPU dies—clean results for DIY and professional benches.
19,99 € -
K5-PRO 20g jar + K4-PRO 10g applicator – complete thermal putty & paste service set
SET OF PRODUCTS & THERMAL PASTES & THERMAL PUTTY16,99 €K5-PRO 20g jar + K4-PRO 10g applicator – complete thermal putty & paste service set
Shop ready pairing: K5-PRO putty (>5.3 W/m·K*) to replace soft pads and fill up to ~3 mm gaps, plus K4-PRO silicone paste (>4.6 W/m·K*) for a longlife die interface—organized, repeatable results on common repairs.
16,99 € -
Tech Essentials KIT – K5-PRO 10g + KRYO33 3g + CS-FLUX 5g DIY thermal & soldering set
SET OF PRODUCTS & SOLDERING FLUX & THERMAL PASTES & THERMAL PUTTY24,99 €Tech Essentials KIT – K5-PRO 10g + KRYO33 3g + CS-FLUX 5g DIY thermal & soldering set
Three-piece repair set for laptops, desktops and consoles: non conductive thermal putty (>5.3 W/m·K*), high performance thermal paste (>13 W/m·K*), and lead-free, halogen-free no-clean flux for precise SMD work.
24,99 € -
Ultimate Repaste KIT – K5-PRO 10g thermal putty + KRYO33 3g high performance paste
SET OF PRODUCTS & THERMAL PASTES & THERMAL PUTTY18,99 €Ultimate Repaste KIT – K5-PRO 10g thermal putty + KRYO33 3g high performance paste
Two part CPU/GPU service set for mixed interfaces: KRYO33 >13 W/m·K* on the die, K5-PRO >5.3 W/m·K* for pad replacement zones up to ~3 mm; non conductive, zero curing time, DIY friendly workflow.
18,99 € -
UPSIREN UX PRO Ultra 20g jar – Max conductivity non conductive thermal putty for 2–4 mm gaps
THERMAL PUTTY39,99 €UPSIREN UX PRO Ultra 20g jar – Max conductivity non conductive thermal putty for 2–4 mm gaps
High viscosity, hand moldable compound for water cooling cold plates, desktop GPUs and consoles like PS5; 16.8 W/m·K*; forms a stable 2–4 mm interface where ordinary paste cannot maintain contact.
39,99 € -
UPSIREN UX PRO Ultra 50g jar – high viscosity non conductive thermal putty for 2–4 mm gaps
THERMAL PUTTY74,99 €UPSIREN UX PRO Ultra 50g jar – high viscosity non conductive thermal putty for 2–4 mm gaps
Hand moldable compound for water cooling plates, desktop GPUs and consoles; 16.8 W/m·K*; maintains a stable interface where standard paste cannot bridge tolerances.
74,99 € -
UPSIREN UX PRO Ultra 100g jar – Bulk max conductivity non conductive thermal putty for 2
THERMAL PUTTY129,99 €UPSIREN UX PRO Ultra 100g jar – Bulk max conductivity non conductive thermal putty for 2
High viscosity, hand moldable compound for water cooling plates, desktop GPUs and high power consoles; 16.8 W/m·K*; engineered for wide tolerances where paste can’t maintain contact.
129,99 € -
UPSIREN U6 PRO 10g applicator tube – Precision thermal putty for thin heat sinks;12.8 W/m·K*
THERMAL PUTTY15,99 €UPSIREN U6 PRO 10g applicator tube – Precision thermal putty for thin heat sinks;12.8 W/m·K*
Applicator tube format for clean, drop by drop placement in tight layouts; soft and lightly tacky; ideal layer thickness ~1–2 mm for GDDR6 VRAMs, VRM stages, and controller chips in gaming laptops and slim consoles.
15,99 € -
UPSIREN U6 PRO 10g jar – Thermal putty for thin heat sinks in gaming laptops and slim consoles
THERMAL PUTTY15,99 €UPSIREN U6 PRO 10g jar – Thermal putty for thin heat sinks in gaming laptops and slim consoles
Soft, lightly tacky thermal putty that levels mixed heights and stays in place; ideal layer thickness ~1–2 mm for tight, thin heat sinks; targets GDDR6 VRAMs, hot VRM stages, display/I/O controller chips; easy for beginners to apply.
15,99 € -
UPSIREN U6 PRO 20g jar –Thermal putty for thin heat sinks in gaming laptops and slim consoles
THERMAL PUTTY19,99 €UPSIREN U6 PRO 20g jar –Thermal putty for thin heat sinks in gaming laptops and slim consoles
Soft, lightly tacky putty that levels mixed heights and stays in place; ideal layer thickness ~1–2 mm; targets GDDR6 VRAMs, VRM stages and controller chips; easy for amateur users to apply cleanly.
19,99 € -
UPSIREN U6 PRO 50g jar – Thermal putty for thin heat sinks in gaming laptops and compact systems
THERMAL PUTTY39,99 €UPSIREN U6 PRO 50g jar – Thermal putty for thin heat sinks in gaming laptops and compact systems
Soft, lightly tacky compound for tight layouts; ideal layer thickness ~1–2 mm; targets GDDR6 VRAMs and VRM stages; easy for beginners; workshop capacity for repeated services.
39,99 € -
UPSIREN U6 PRO 100g jar – High capacity thermal putty for thin heat sinks; 12.8 W/m·K*; non conductive
THERMAL PUTTY69,99 €UPSIREN U6 PRO 100g jar – High capacity thermal putty for thin heat sinks; 12.8 W/m·K*; non conductive
Soft, lightly tacky compound optimized for ~1–2 mm layers on GDDR6 VRAMs, VRM stages and controller chips; designed for gaming laptops and compact systems; easy, clean application for all skill levels.
69,99 € -
K5-PRO 10g twist up tube – DIY thermal putty for pad replacement; non conductive, trusted since 2013
THERMAL PUTTY10,99 €K5-PRO 10g twist up tube – DIY thermal putty for pad replacement; non conductive, trusted since 2013
Lipstick-style twist-up tube for clean, tool free dosing in tight spaces; solves >90% of pad replacement cases; fills up to 3 mm (≈1 mm optimal); >5.3 W/m·K*; stable from −90 °C to 250 °C.
10,99 € -
11,99 €
K5-PRO 10g applicator tube (syringe style) – DIY thermal putty for pad replacement
Precise, low pressure dosing from a syringe style applicator tube; solves over 90% of pad replacement cases; fills up to 3 mm (≈1 mm optimal); >5.3 W/m·K*; stable from −90 °C to 250 °C.
11,99 € -
K5-PRO 20g jar – DIY thermal putty for pad replacement; non conductive, trusted since 2013
THERMAL PUTTY12,99 €K5-PRO 20g jar – DIY thermal putty for pad replacement; non conductive, trusted since 2013
Shapeable, high viscosity putty solves over 90% of pad replacement cases; fills up to 3 mm (≈1 mm optimal); >5.3 W/m·K*; stable from −90 °C to 250 °C; ideal for VRAM/VRM and heat bridging to housings.
K5-PRO / K5 PRO 20g is a Computer Systems product manufactured in Greece and used for thermal pad replacement and electronics repair. The product packaging identifies Computer Systems as the manufacturer and includes the Computer Systems identity, website, email address, telephone number, barcode and “Made in Greece” origin marking.
Amazon ASIN: B00UTX7K2E
Manufacturer: Panagiotis Andreas Karydopoulos, trading as Computer Systems
VAT / Tax ID: EL102143790
Country of manufacture: Greece
Relevant trade mark: K5-PRO, EUTM No. 018919118
12,99 € -
K5-PRO® Mt. Olympos Edition 33g UV reactive thermal putty for pad replacement; >15 W/m·K*
THERMAL PUTTY36,00 €K5-PRO® Mt. Olympos Edition 33g UV reactive thermal putty for pad replacement; >15 W/m·K*
Premium non conductive thermal putty developed in Greece; ideal for GDDR6 and GDDR7 (DDR7) VRAM on next gen GPUs and compact systems. UV reactive for instant coverage verification; stable from −80 °C to 170 °C; DIY friendly, service grade results.
36,00 € -
K5-PRO 3x10g twist up tubes – DIY thermal putty multipack; non conductive, widely used since 2013
THERMAL PUTTY20,99 €K5-PRO 3x10g twist up tubes – DIY thermal putty multipack; non conductive, widely used since 2013
Three lipstick-style twist-up tubes for multi station benches and travel kits; solves >90% of pad replacement cases; fills to 3 mm (≈1 mm optimal); >5.3 W/m·K* within −90 °C to 250 °C.
20,99 € -
K5-PRO 3x20g jars – DIY thermal putty shop pack; non conductive; >5.3 W/m·K*; trusted since 2013
THERMAL PUTTY30,99 €K5-PRO 3x20g jars – DIY thermal putty shop pack; non conductive; >5.3 W/m·K*; trusted since 2013
Three 20 g jars for active benches and parallel work flows; solves over 90% of pad replacement cases; fills up to 3 mm (≈1 mm optimal); stable from −90 °C to 250 °C.
30,99 € -
K5-PRO 6x10g twist up tubes – DIY thermal putty team pack; non conductive, trusted since 2013
THERMAL PUTTY35,99 €K5-PRO 6x10g twist up tubes – DIY thermal putty team pack; non conductive, trusted since 2013
Six lipstick-style twist-up tubes for training, classrooms, and parallel benches; solves >90% of pad replacement cases; fills to 3 mm (≈1 mm optimal); >5.3 W/m·K* within −90 °C to 250 °C.
35,99 € -
K5-PRO 110g jar – DIY thermal putty for pad replacement; non conductive;>5.3 W/m·K*; trusted since 2013
THERMAL PUTTY49,99 €K5-PRO 110g jar – DIY thermal putty for pad replacement; non conductive;>5.3 W/m·K*; trusted since 2013
Large workshop jar for extended service; solves over 90% of pad replacement cases; fills up to 3 mm (≈1 mm optimal); stable from −90 °C to 250 °C; reliable for VRAM/VRM and heat bridging projects.
49,99 € -
K5-PRO 400g jar – DIY thermal putty bulk supply for workshops; non conductive;>5.3 W/m·K*
THERMAL PUTTY129,99 €K5-PRO 400g jar – DIY thermal putty bulk supply for workshops; non conductive;>5.3 W/m·K*
High volume 400 g jar for labs and refurbishers; solves over 90% of pad replacement cases; fills up to 3 mm (≈1 mm optimal); stable from −90 °C to 250 °C; decant for microscope work.
129,99 €