Description

• K5-PRO is a high quality gummy / sticky thermal paste designed for use on memory chips and other components where thermal pads are originally used.
• K5-PRO can replace soft thermal pads that are used on computers (best performance up to 1mm, maximum gap that can be filled up to 3mm).
• K5-PRO has thermal conductivity K>5,3 W/m.K * (at least 3 times higher than common thermal pads that are used on computers and commercial electronics)
• K5-PRO is applied very easily directly on the component and has no electrical conductivity. Operational temperature -90 to 250 degrees (Celsius).

• KRYO33 has thermal conductivity > 13W/mK *. Thermal resistance < 0,004 K/W. Maximum possible thermal conductivity (for not electric conductive pastes).
• KRYO33 is Ideal for over clocking since it is superior to any thermal paste originally used by manufacturers. No curing time (system can be used immediately after application). Long service time (at least 8 years after application).
• KRYO33 can be perfectly combined with K5 PRO since both consist of very small particles. This way they allow heat sink to reach minimum possible distance from warm component even if heat sink is not flat at all areas. At the same time all gaps between heat sink and component, even the invisible gaps on metal surface, are filled with thermal conductive materials.
• KRYO33 has zero electric conductivity. Can be applied on all surfaces of electronic components and PCBs even on aluminum. Color Gray Specific gravity 2,9 (30% lower than competitive products so less weight is needed for same surface). Certification Reach, ROHS, CE Electric conductivity 0 pS/m Viscosity 120-170 Pas. Operation temperature -90 °C / +270 °C Designed and produced in E.U. (GREECE)

Description:

This offer is for a set of thermal pastes which can be used to replace both thermal pastes and thermal pads on laptops, desktops, cryptocurrency video board miners and gamestations compatible with iPhone Apple iMac, Apple Macbook, Sony Playstation 3, PS4, Microsoft XBOX, etc. The set includes 3g of highest thermal conductivity KRYO33 paste and 10g of viscous thermal paste K5 PRO (for use instead of thermal pads on memory chips and other components). You can see our instructions videos in our youtube page ” ComputerSystemsGR “.KRYO33 and K5-PRO are developed and produced by Computer Systems laboratories research team. These products were developed as part of our BGA rework research project with the support of Greece and European Union. With thermal conductivity over 13W/m.k KRYO33 is so effective not only because it’s ingredients have very high thermal conductivity but also because their particles have the minimum possible size. With particle size ranging at 30nm KRYO33 behaves like viscous liquid while it is actually a cream of solid but very small particles. For this reason we know for sure that KRO33 have the maximum thermal conductivity that any thermal paste can reach without using electrical conductive materials (like metals). KRYO33 can be perfectly combined with K5 PRO since both consist of very small particles. This way they allow heat sink to reach minimum possible distance from warm component even if heat sink is not flat at all areas. At the same time all gaps between heat sink and component, even the invisible gaps on metal surface, are filled with thermal conductive materials. Key features Zero electric conductivity Can be applied on all surfaces of electronic components and PCBs even on aluminum Color Gray Specific gravity 2,9 (30% lower than competitive products so less weight is needed for same surface) Certification Reach, ROHS, CE Electric

K5-PRO
• K5-PRO is a high quality gummy thermal paste designed for use on memory chips and GPUs of various computers and video boards.
• K5-PRO can replace soft thermal pads that are used on computers (up to 3mm thick).
• K5-PRO has a thermal conductivity of K>5,3 W/m.K * (at least 3 times higher than common thermal pads that are used on computers and commercial electronics).
• K5-PRO is applied very easily, directly on the component, and has no electrical conductivity. It can be heated up to 250 Celsius degrees and has a long operational life time (technically infinite after the installation).

KRYO33

• KRYO33 has a thermal conductivity of more than 13W/mK *. Thermal resistance < 0,004 K/W.
• KRYO33 is Ideal for over clocking since it is superior to any thermal paste originally used by manufacturers.
• Maximum possible thermal conductivity (for not electric conductive pastes).
• No curing time (system can be used immediately after application).
• Long service time (at least 8 years after application).
• KRYO33 can be perfectly combined with K5 PRO and is ideal for heat sinks with not equal gaps.

Instructions

When to replace the thermal paste / pads in your computer:

Thermal paste and thermal pads should be replaced every time that the heat sink is removed (for cleaning, upgrade or other maintenance). Replacing the thermal pads and the gummy thermal paste that is used by Apple on the memory chips is very important if the heat sink is removed because if you reuse the same thermal pads or paste the heat sink is impossible to fit perfectly again and the component will be overheated and will fail soon.
If your computer is overheated or turns off after a few hours of use. In this case the entire heat sink system must be cleaned immediately and all thermal paste and thermal pads must be replaced.

Content
3g of highest thermal conductivity KRYO33 paste
10g of viscous thermal paste K5 PRO (for use instead of thermal pads on memory chips and other components)
Wooden stick
Instructions for use

Expiration Date
No expiration date (new formula). Infinite storage / service life.

VIDEOS